The purpose of the investment is to increase the production capacity of transformer housings with an emphasis on sustainable development. With this investment, we are optimizing the flow of products through individual production phases and raising the production process to a new, higher level in terms of the quality of corrosion protection for transformer housings.
The investment includes the construction of two production halls, a sandblasting and painting chamber, a paint mixer, bridge cranes, a computer-controlled automated modular warehouse for the distribution of stick material, a compressor, a waste solvent distillation unit, and other equipment.
As part of the operation, Preis Sevnica will install solar power plants on both new industrial halls and most of the existing buildings, and heat pumps will also be installed in both newly built halls, although these costs are not included in the eligible costs. With this new investment, we will achieve goals such as improved energy and material efficiency, reduced environmental impact, and increased added value per employee.
Total project value: EUR 6,556,355.45
Amount of eligible costs: EUR 5,855,696.90
Amount of co-financing: EUR 819,279.50
Project duration: September 2024 – June 2026
The project was awarded a subsidy under the Public Call for Proposals for the Promotion of Large Investments for Greater Productivity and Competitiveness in the Republic of Slovenia September 2024 (JR INVEST September 2024 – NOO).
The investment is co-financed by the Republic of Slovenia and the European Union from the Recovery and Resilience Facility under budget item 221475 – C3K9IC Promotion of investments under the ZSInv for smart, sustainable, and inclusive growth NOO – MGRT.
Povečanje proizvodne kapacitete z gradnjo dveh novih hal za izboljšanje procesa lakiranja, peskanja ter pretočnosti posameznih faz proizvodnje s poudarkom na trajnostnem razvoju, energetski ter snovni učinkovitosti
Namen investicije je povečanje kapacitet proizvodnje transformatorskih ohišij s poudarkom na trajnostnem razvoju. S predmetno investicijo optimiziramo pretok izdelkov skozi posamezne faze proizvodnje in dvigujemo proizvodnji proces na novo, višjo raven glede kvalitete protikorozijske zaščite transformatorskih ohišij.
Investicija vključuje izgradnjo dveh proizvodnih hal, peskalno in lakirno komoro, mešalnico barv, mostna dvigala, računalniško vodeno avtomatizirano modularno skladišče za izdajo paličnega materiala, kompresor, napravo za destilacijo odpadnih topil ter ostalo opremo.
Preis Sevnica bo v okvirju operacije postavila sončne elektrarne na obeh novih industrijskih halah in večini obstoječih objektov, v obeh novozgrajenih halah bosta nameščeni tudi toplotni črpalki, pri čemer se ti stroški ne vštevajo med upravičene. Z novo investicijo bomo dosegli cilje kot je izboljšana energetska in snovna učinkovitost, zmanjšani okoljski vplivi ter povečanje dodane vrednosti na zaposlenega.
Skupna vrednost projekta: 6.556.355,45 EUR
Višina upravičenih stroškov: 5.855.696,90 EUR
Višina sofinanciranja: 819.279,50 EUR
Trajanje projekta: september 2024 – junij 2026
Projektu je bila dodeljena subvencija v okviru Javnega razpisa za spodbujanje velikih investicij za večjo produktivnost in konkurenčnost v Republiki Sloveniji september 2024 (JR INVEST september 2024 – NOO).
Naložbo sofinancirata Republika Slovenija in Evropska Unija iz naslova sredstev mehanizma za okrevanje in odpornost s proračunske postavke 221475 – C3K9IC Spodbujanje investicij po ZSInv za pametno, trajnostno in vključujočo rast NOO – MGRT.
